Best Water Heater for Very Hard Well Water?

Plumbing Forums

Help Support Plumbing Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

inspectordan

Member
Joined
Sep 13, 2024
Messages
12
Reaction score
1
Location
IL
We are replacing our electric resistance water heaters on average every 3 or 4 years. Rheem Marathon? Heat Pump Water Heater? ....gas isn't an option since we're talking 55 units and venting and makeup air in these 3 story buildings would be a nightmare. TIA.
 
Are they being replaced cause they start leaking, or due to excessive scale buildup. If water is that hard you should have a water softener and treatment system. Do the water heaters get flushed regularly to help remove scale buildup.
 
Are they being replaced cause they start leaking, or due to excessive scale buildup. If water is that hard you should have a water softener and treatment system. Do the water heaters get flushed regularly to help remove scale buildup.
I inspected the property for the buyer who has it under contract. It looks like they're corroding and since Google tells me that the well water for this municipality is 22-23 grains then I have to assume it's also gobbing up the heating elements. There is a softening system in place but it doesn't look big enough for the number of units and the system does not appear to be properly maintained.
 

Attachments

  • Hardness_Chart_1600x.jpg
    Hardness_Chart_1600x.jpg
    121.9 KB
Last edited:
Unlikely to leak, but will the heating elements last any longer?
"Titanium elements with low watt density, longer element life' according to the product literature. At least this type of water heater (with it's 'lifetime' stainless steel tank) will be worth the time and effort it takes to drain the unit, replace the elements, and check/replace the anode rod. Right?
 
"Titanium elements with low watt density, longer element life' according to the product literature. At least this type of water heater (with it's 'lifetime' stainless steel tank) will be worth the time and effort it takes to drain the unit, replace the elements, and check/replace the anode rod. Right?
It doesn’t have an anode rod.

The elements will last just as long as any other element IMO.
 
I inspected the property for the buyer who has it under contract. It looks like they're corroding and since Google tells me that the well water for this municipality is 22-23 grains then I have to assume it's also gobbing up the heating elements. There is a softening system in place but it doesn't look big enough for the number of units and the system does not appear to be properly maintained.
Water test? Do you have detailed info on what is in the 'hardness' of the water? I would solve the long-term problem first. I live on well water that is in that range with super high calcium.... just six weeks after moving in my house (before we had the softener installed) resulted in massive accumulation in fixtures and pipes. Proper water softener solved it.
 
The reviews on the stainless one arnt to good, especially if something goes wrong.
That makes sense because most people don’t leave a review if they’re happy. I never leave good review…..only bad. Every brand has trouble just like every car dealership has a service department.
 
Back
Top