Toilet Bidet Thread Adapter Help

Plumbing Forums

Help Support Plumbing Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rsyed91

New Member
Joined
Dec 24, 2024
Messages
1
Reaction score
0
Location
Virginia
I am working to install a bidet to a toilet in my apartment. The bidet comes with a T-joint with a 15/16" female and male thread (shown in Picture 1 attached). My apartment toilet only has a 9/16" thread. I would like to connect the existing 9/16" thread to the T-joint via a thread hose adapter (see Picture 3 attached). To do this, it appears I need to buy:
  1. Female 9/16" to Male 15/16" thread hose adapter
  2. Male 15/16" to Female 9/16" thread hose adapter
Thoughts on this? I looked online for these and could not find it. Would like help on this solution (open to alternative ideas) along with where to buy the desired adapter parts.

Thank you!
 

Attachments

  • Picture 1.png
    Picture 1.png
    1.6 MB
  • Picture 2.png
    Picture 2.png
    1.3 MB
  • Picture 3.png
    Picture 3.png
    1.7 MB
The tee's are designed to be connected to the base of fill valves, not onto the floor. Here is how mine is connected.
 

Attachments

  • 17350533943438845051861120209440.jpg
    17350533943438845051861120209440.jpg
    1.3 MB
Yes, those toilets with the hose connection to the refill valve inaccessible won't allow that type of bidet to be installed. Aesthetics over functionality.
 
Back
Top