Kennyv519
New Member
My basement shower has the following valve system. We never use this shower but I would like to get it working just in case. The water was not coming on when opening the valve. I tore apart the wall and seen there were two screws on either side of the valve that were closed. I opened the right screw and got cold water to run but the left screw will not let hot water through. There is a large nut next to it that it tight and unable to be loosened. It appears this is causing the blockage for the hot water. Can anyone verify by what you see in the pic? I’m hoping to fix this myself without hiring someone so any advice is appreciated!
