Identify this faucet to get parts

[Dwade23]

Identify from these pictures?

 

[Twowaxhack]

It’s a Delta

 

[Dwade23]

So I go to a Delta parts supplier and ask for a Delta repair kit and it's that simple?

 

[Twowaxhack]

Remove the handle and take another pic looking straight down over the faucet and I’ll tell you what parts it takes. I believe it’s the old style parts but I’m not positive.

 

[Twowaxhack]

It’s probably this kit and you get 4 o rings. You would throw the two thin orings away. You would use the two thicker ones.

https://www.amazon.com/Delta-Faucet...ocphy=9012990&hvtargid=pla-349148514133&psc=1

 

[Dwade23]

Thank you for your input. I'm trying to help my daughter who has this faucet in DC while I'm in the Heartland. I'll send her this thread and see if she can take another pic. Thanks again !

 

[ESTIMATOR]

Sometimes.....it's best and easier to buy a new kitchen faucet. If the faucet is over ten years old, buy a new one. You'll also will find the angle stops not shutting off completely....

 

[Twowaxhack]

Sometimes.....it's best and easier to buy a new kitchen faucet. If the faucet is over ten years old, buy a new one. You'll also will find the angle stops not shutting off completely....

It’s a Delta. There’s only been a couple in 36 yrs that I haven’t been able to repair. The ones over 10 yrs old are the best ones….

It’s one of the most repairable faucets ever made.

 

[ESTIMATOR]

Moentrol and moen posi-temp cartridges are easy to replace, but due to hard water....they can be a pain to pull out.

 

[Dwade23]

Sometimes.....it's best and easier to buy a new kitchen faucet. If the faucet is over ten years old, buy a new one. You'll also will find the angle stops not shutting off completely....

I did suggest that to my daughter and sent her many links to very affordable ones on Amazon.