Does Anyone Know The Faucet Cartridge Manufacturer?

Plumbing Forums

Help Support Plumbing Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

gil_happy

Member
Joined
Nov 4, 2017
Messages
11
Reaction score
1
Location
,
Hello,

I have a slow drip in my cold water tap and I need to replace the cartridge. Does anyone know what or who the manufacurer is of this faucet?

I bought this faucet about 10 years ago from Home Depot or Lowes if that helps.

I don't want to remove the cartridge and take to either store at this time since I have a renter moving in and I don't want to create a big headache a day or two they are scheduled to move in.

Thanks in advance!

IMG_20171103_183151.jpg

IMG_20171103_183203.jpg
 
Not from those photos. Try removing the stem assembly from the faucet and the white adapter. take another photo or 2
 
Not from those photos. Try removing the stem assembly from the faucet and the white adapter. take another photo or 2

Ok thank you... I might just hold off on removing the stem for right now since it is not leaking too badly (drips once every 30 mins or so). I was thinking I would just order one for the future and change it out when needed.

I was hoping someone might be able to figure out the brand without having to remove it.

Thanks
 
take off the white adapter. There a lot of stems that look similar to that.
 
take off the white adapter. There a lot of stems that look similar to that.

Here is a pic with the white stem removed. Remember, I don't want to take the entire stem assembly off at this time.

Thanks

IMG_20171105_065535.jpg

IMG_20171105_065543.jpg
 
Could be this one. has similar thread pattern
But the broach looks longer
Kohler 1071965

Kohler 1071965.jpg
 
Could be this one. has similar thread pattern
But the broach looks longer
Kohler 1071965

Thank you for the suggestion.... I don't think this is the right one since it is very unlikely I purchased a Kohler faucet when I did my remodel 10 years ago (wouldn't have spent the money).

Looks like I will need to remove the entire assembly to determine the correct manufacturer.
 
Back
Top