sink braided hose adaptors

[220ws]

will these adaptors(scroll towards bottom) work to join a 1/2 braided hose
to a 3/8 braided??? damn Kohler faucet has short hoses..
they call them compression couplings..

Stainless steel flex connectors - Best selection on the Internet from PlumbingSupply.com

 

[Chris]

Why not just get longer hoses? It would take a few fitting to get to both those sizes and then there is that much more possibility for a leak.

 

[phishfood]

Most faucets have either the male section of a basin connection or 3/8" compression fittings on them. With the basin connection, you attach a supply tube with a basin nut. With the 3/8" compression, which is what it sounds like you have, they are meant to attach directly to the supply valve. Often, they aren't long enough. Get 3/8" compression couplings and a short length of soft copper to bridge the gap between the supply tubes and the supply stop.

 

[lordofthepipes]

or you could just get a couple of delta tubes or maybe i should say extension 3/8 tubes.

 

[220ws]

Home depot had a simple faucet ext connector with male and female ends.
easy and only 5 budks.

 

[DUNBAR PLUMBING]

The supply lines at home depot are usually braided polymer hoses, not braided stainless steel hoses.