gerry_foster
New Member
hi there, as title mentions ive got a few questions on installing two saniflow products.
first off, my home is built on solid flat rock so a traditional pit and pump was out of the question from the start.
I have a sanishower gray water pump for a shower and sink
and a sanistar wall hung self contained toilet
My question is this.....
can these two units have there discharge pipes joined together at a common point to ease running 2 separate runs half way across my basement. I realize it would need to be double the size and a very free flowing y junction if they were connected. the shower is a 3/4" dis and the toilet is a 1" dis. the vague instructions want copper pvc or cpvc used with out any short 90° joints.
any advice would be great �� .
cheers, Gerry
first off, my home is built on solid flat rock so a traditional pit and pump was out of the question from the start.
I have a sanishower gray water pump for a shower and sink
and a sanistar wall hung self contained toilet
My question is this.....
can these two units have there discharge pipes joined together at a common point to ease running 2 separate runs half way across my basement. I realize it would need to be double the size and a very free flowing y junction if they were connected. the shower is a 3/4" dis and the toilet is a 1" dis. the vague instructions want copper pvc or cpvc used with out any short 90° joints.
any advice would be great �� .
cheers, Gerry
