Installing ice maker line with adaptor thread

[azita]

I want to use one of the braided steel cables to hook to the fridge to install a water line for my ice maker. The braided steel cable I have has a 1/4" Inner diameter threaded female end:

http://www.homedepot.com/p/Watts-1-...nless-Steel-Icemaker-Connector-FSK7/100660195

I have a shark bite quarter turn stop on the pipes:

http://www.sharkbite.com/product/straight-stops/

Can I connect the 1/4" cable to the quarter stop with an adaptor like this:

http://tinyurl.com/janmnee

I would use teflon tape on the end of the quarter stop.

 

[Mr_David]

NO Teflon needed. You should be able to attach the braided hose fitting directly to the stop valve.

both ends of that hose should be the same.
1/4" compression. just take the nut and ferrule off the stop valve and screw on the hose. DO NOT use any tape